Home Improvement Ideas > Floor > Fix Scratch in Wood Floor

Fix Scratch in Wood Floor

Fix Scratch in Wood Floor

It is surprising indeed when you find your favorite wooden floor looks not attractive anymore because of scratches that are easily recognizable on the surface. Many causes why these scratches are formed. It can be from your pet dog claws, stones caught in the bottom of the shoe and many other reasons. Do not make yourself gloomy thinking of ways to fix scratch in wood floor. The repair process is straightforward and does not take you all day long if the scratches are not too deep. However, this will be quite difficult if the scratch has piled up deep and rough. Then you will need to spend extra time and energy today.

What should you do then? We will give you some tips on how to fix a scratch in the wood floor. This is very easy to be practiced. Read on to find the solution.


  • Vacuum cleaner
  • Clean cloth
  • Penetrating resin sealer
  • A grain 220-grit sandpaper
  • A sandpaper
  • Tinted wood filler

There are two types of scratches, shallow and deep.

Shallow Scratches

  1. Rub the scratch on the floor surface with fine sandpaper in one direction. Do until the surface is genuinely smooth.
  2. Use a vacuum to remove the grains of dirt and dust from sanding on the scratches.
  3. Use a wetted clean cloth with penetrating wax or resin sealer. Penetrating sealers work well for open grain wood, oak, and teak. It is also safe for most hardwoods that are used as wooden floors.
  4. Let until the oil penetrates the wooden crack. Repeat this process until the wood absorbs enough penetration sealer so that it is parallel to the surrounding floor surface.
  5. Gently rub the area with a lint-free scrubber after the sealer completely dries.
  6. After this, you will not need the coloring process because the scratches do not penetrate beneath the stained wood surface.

Deep Scratches

  1. If there is filler flake, gently wipe with a cloth before it hardened.
  2. Add as many fillers as needed to cover the inside of the scratches.
  3. Use match tinted wood filler with the color of the wood floor.
  4. Vacuum the crack to remove all the sanding dust and dirt that is not lifted to the floor so that crack is completely clean.
  5. Rub the scratch on the floor surface with a 220-grit sandpaper pad in one direction. Do until the surface is removed and genuinely smooth.
  6. Dry the filled scratch for 12-24 hours. Then you can sand the wood filler. Use a fine-grit sanding pad or a small disc sander until the wood filler is parallel to the surrounding floor.
  7. Paint the wood filler with an artist’s paintbrush using a stain that matches the rest of the floor if you used untinted filler.
  8. The final stage is to color on the surface of the filler. Use match color as your home floor.


  • Use sandals that do not scratch the floor.
  • Wear safety goggles, gloves, and mask when sanding scratches.
  • Block the area from foot traffic until the floor has been completely fixed.


Leave a Reply

Your email address will not be published. Required fields are marked *